Excel Plast Factory

Your Poly - Packaging Partner !

Printing

We use very high quality FLEXO Printing machineries to provide the best finishing plastic bag to our clients.

 

Flexography

Flexography (often abbreviated to flexo) is a form of printing process which utilizes a flexible plate. It is essentially a modern version of letterpress which can be used for printing on almost any type of substrate, including plastic, metallic films, cellophane, and paper. It is widely used for printing on the non-porous substrates required for various types of food packaging (it is also well suited for printing large areas of solid color).

 

A flexographic print is made by creating a positive mirrored master of the required image as a 3D relief in a rubber or polymer material. Flexographic plates can be created with analog and digital platemaking processes. The image areas are raised above the non image areas on the rubber or polymer plate. The ink is transferred from the ink roll which is partially immersed in the ink tank. Then it transfers to the anilox or ceramic roll (or meter roll) whose texture holds a specific amount of ink since it is covered with thousands of small wells or cups that enable it to meter ink to the printing plate in a uniform thickness evenly and quickly (the number of cells per linear inch can vary according to the type of print job and the quality required).

To avoid getting a final product with a smudgy or lumpy look, it must be ensured that the amount of ink on the printing plate is not excessive. This is achieved by using a scraper, called a doctor blade. The doctor blade removes excess ink from the anilox roller before inking the printing plate. The substrate is finally sandwiched between the plate and the impression cylinder to transfer the image. The sheet is then fed through a dryer, which allows the inks to dry before the surface is touched again. If a UV-curing ink is used, the sheet does not have to be dried, but the ink is cured by UV rays instead.

        

 

Excel Plast is a leading plastic bag manufacturer
The Factory at Al Quoz industrial area 4 in Dubai has a built-up area 15,000 Square feet,and storage area 15,000 Square feet. »

Our Products
Varieties of bags with bottom seal, side seal, with handle, etc. Different shopping bag for supermarkets, restaurants, garments, electronics, accessoies shops. »

Quality Policy
Satisfy customer needs and expectations by delivering products that are verified to meet the agreed requirements, on time. »

Our Vision:
Provide the fastest service to our customers by means of our experiences and expert staff.
Our principle is investing in innovations, sector and our customers,
Our goal is increasing our exportation, maintaining the constant customer satisfaction. . »